Improved Bipod Picatinny Rail (IBR)

$40.00

Description

Area 419 is always looking for ways to improve existing products when we are not developing new technologies.  The bipod rail, as simple as it may seem, was one that could use some improvement.  We started from scratch on this project, and came up with a pretty slick rail!

  • Rail is 4.8″ long with 10 slots.  This gives you 43% more slots than the competition.  The best part is, it weighs in at a paltry 1.09oz compared to 1.18oz for the smaller competitor.
  • No sharp edges.  Every corner is radiused, and every edge is chamfered on the machine.  This takes much longer to make, but it is the only right way.
  • Accommodates anywhere from 1.5″ – 3.475″ center on center screw hole spacing.  If you are closer to the 1.5″ spacing, we do not suggest using the flush cup mount for carrying the rifle, it will just have too much leverage and may tear the thread insert out of the stock.
  • One full width lug to accommodate Larue style bipod mounts.
  • Every slot is usable no matter where your mounting screws are.  This is a foreign feature to other competitors where the screws are not countersunk below the slot level.
  • Made from 7075-T651 Aluminum for the greatest strength possible while maintaining its light weight.
  • Made in-house here in the USA from USA sourced Aluminum on USA made CNCs
  • Standard rail comes with (2) 10-32 x 3/4″ Low profile socket head cap screws and (2) tee-nuts for installation in stocks with no hardware.  A 3/4″ paddle bit and drill press may be required for installation of tee-nuts.

 

Weight .2 lbs
Dimensions 8.25 × 1 × 1 in
Manufacturer

Area 419
Attachment Method

Traditional, MLOK, Keymod

201 reviews for Improved Bipod Picatinny Rail (IBR)

  1. Ben A. (verified owner) –

    High quality product that for perfectly

  2. Dr. George N. Mitri, NSPE (verified owner) –

    Yes!!! I love the new rail. Thank you!

  3. Jeff K. (verified owner) –

    I don’t know why I waited so late in life to use these bi-pod rail adapters until now. I’ll be installing these on all my bolt guns from here on out.

  4. Scott (verified owner) –

    Worked great.

  5. Jimmy Tolbert (verified owner) –

    Works great, sorry I have no pictures.

  6. Anonymous (verified owner) –

    Ordered for a bipod without knowing the bipod only fit on arcalock rails, but it is a picatinny, so could still be very useful

  7. Ryan H. (verified owner) –

    Great product wish it can with a couple of extra options for screw size, a pair of longer ones in the package would have eliminated the need for me to dremel down my stock some.

  8. Garry (verified owner) –

    Exactly what was needed.

  9. Marvin Stevens (verified owner) –

    Well made product. Allows more flexibility than factory attachment.

  10. Randi C. (verified owner) –

    Works great!

  11. Harald Appelboom (verified owner) –

    Precise fit, easy installation, very high quality

  12. Marco L. (verified owner) –

    Great Rail

  13. David A. (verified owner) –

    Nicely made, great design.

  14. James (verified owner) –

    phenomenal quality

  15. Anonymous (verified owner) –

    Easy to use

  16. Ed B. (verified owner) –

    Great Product. Works well with my Accutac bipod.

  17. Anonymous (verified owner) –

    It works Great

  18. Anonymous (verified owner) –

    Works perfect on my bergara rifles

  19. Travis G. (verified owner) –

    Solid design allowing me to use the existing sling swivel mounts on the fore-end of my Bergara B14 HMR. The bipod is rock solid on this rail!

  20. Marvin Stevens (verified owner) –

    Interesting concept and seems to work as advertised. I had to buy two different screws for my particular application, but that wasn’t a big deal.

  21. Jason L. (verified owner) –

    Great product, perfect fit on my B14R.

  22. Stephen H. (verified owner) –

    This is my 4th one of these. I use these on the Mlok rails and have my vertical grip at the back and bipid mounted at the front of the is rail section. That may not be the intended use but it fills the role I put it in perfectly.

  23. Jeremy K. (verified owner) –

    Great product with excellent machining and finish! Fits perfectly on my Horizon Vandal .308 and makes a great attachment point for my Atlas bipod. Only minor gripe is that the QD socket is not limited rotation, but I remedied that with a Magpul QD socket.

  24. Stephen M. (verified owner) –

    Perfect fit, just as advertised.

  25. Michael O’Connor (verified owner) –

    I have these rails on all of my Bergara rifles. Perfect fit!

  26. David M. (verified owner) –

    Instead of a universal slider for mounting screws onto stock, maybe make holes every 0.5 inches from 2-4 inch mark. Would make a stronger rail

  27. CHAD G. (verified owner) –

    Very solid, fits great and really increases the functionality of my stock rifle.

    Image #1 from CHAD G.

  28. George (verified owner) –

    Love it. Work great

  29. Jeremiah (verified owner) –

    Great Price

  30. Dave G. (verified owner) –

    Well designed and made.
    Easy to install + perfect fit

  31. Anonymous (verified owner) –

    Nicely made part.

  32. Mark W. (verified owner) –

    Excellent!!! Fit & finished is perfect! This is my 3rd one.

  33. Chris (verified owner) –

    Perfect upgrade I out one on every standard rifle I have.

    Image #1 from Chris

  34. Anonymous (verified owner) –

    Impeccable

    Image #1 from Anonymous

  35. Austin C. (verified owner) –

    Great piece for my Bergara 300 PRC. Easy install now I’m bipoding my life away. Thanks.

    Image #1 from Austin C.

  36. Anonymous (verified owner) –

    I buy Area 419 products, because I want high quality products that I trust.This item and the supplied fasteners met all expectations.

  37. Craig (verified owner) –

    Competitive pricing for the quality.

  38. Verified Buyer (verified owner) –

    Works great and am very happy with it.

    Image #1 from Verified Buyer

  39. Cutler (verified owner) –

    Very durable, it will seemingly work with any similar set up.. I put it on a Bergera B14 HMR and it’s worked very well

  40. Verified Buyer (verified owner) –

    Much nicer part than what my A3 came with.

  41. Corban Stiles (verified owner) –

    Highest quality, works as intended.

  42. Gilbert Barrett II (verified owner) –

    This is my second one. One on a Bergara HMR in .300prc which is a tank, and one on my CZ .22lr 457.

  43. Verified Buyer (verified owner) –

    Worked on my B14

  44. Bob Hayes (verified owner) –

    Well made. Fit my Bergara B14R and my Kidd with Boyd AT-1 Stock.

  45. Verified Buyer (verified owner) –

    Excellent quality and quick shipping

  46. Charles (verified owner) –

    Perfect fit. I installed the screws/nuts without the rail first to get the nuts seated , then added the rail. If you try to just install the rail the screws are a little too short to get to the threads

  47. Verified Buyer (verified owner) –

    Very nice

  48. Verified Buyer (verified owner) –

    Fir like a glove!

  49. Alan Peterson (verified owner) –

    I am returning this, how doI do this?

  50. EDWIN COMBS (verified owner) –

    Exactly what I wanted.

  51. Don D. (verified owner) –

    Great product

  52. Greg S. (verified owner) –

    Well made and works great my only complaint is no Allen wrench included

  53. Jonathan Taylor (verified owner) –

    Top quality

  54. jacob c. (verified owner) –

    Item installed fairly easy. I didnt need the nutplates that came with it, my stock had a thread plate inside. I did have to cut about about a 1/4″ off of the screws for my stock but it was pretty easy and went right on after that. Looks and works great.

    Image #1 from jacob c.

  55. Rick Mihelcic (verified owner) –

    Perfect fit and smooth edges,
    Easy in the hand and bipod fits fast and easy

  56. Stanley (verified owner) –

    Great

  57. christopher (verified owner) –

    exactly as advertised

  58. Richard H. (verified owner) –

    Bipod picatiny rail fit great on my Bergara B-14r.

  59. vernon w. (verified owner) –

    Its what I ordered fits with no extra work.

  60. Rodney Skidmore (verified owner) –

    Fast delivery

  61. Thomas (verified owner) –

    Easy install, just what I needed!

  62. Stephen (verified owner) –

    Very well made and easy to install.

  63. Michael O’Connor (verified owner) –

    See the comment above!

  64. Eric (verified owner) –

    Very happy with the rail. Extremely sturdy on my Bergara B14 HMR with fast installation

  65. Bailey (verified owner) –

    This rail is perfect for my Lapua! I have the perfect adjustability for my stock and bipods!

  66. Michael O’Connor (verified owner) –

    Excellent quality. This is my 2nd rail from Area 419. The 1st fit my Bergara HMR Pro like a glove!

  67. Travis Richards (verified owner) –

    Great product. I have ordered and installed 3 of there on rifles. Looks and functions great.

  68. Larry G. (verified owner) –

    Good service and product.

  69. David C. (verified owner) –

    Great item at a great price

  70. Thomas S. (verified owner) –

    The Improved Bipod Picatinny Rail (IBR) is very well made. It has a number of places to attach/adjust your bipod, fits nicely on my Bergara HMR Pro. Very satisfied!

  71. Larry H. (verified owner) –

    Great picattiny rail. Well made and perfect fit

  72. Ian (verified owner) –

    I was very happy with the quality and versatility of this picatinny rail. I was able to mount it in the sling stud holes in my CZ 457 Varmint MTR. It is a much more solid platform for my Atlas Bi-Pod.

  73. David (verified owner) –

    Easy install and quality product. My Accu-Tac Bipod likey.

  74. Michael O. (verified owner) –

    Part arrived quickly, packaged very professionally and mounted with all of the Area 419 hardware easily.

  75. Christopher (verified owner) –

    Decent quality. I’d say it’s a little overpriced.

  76. Ryan S. (verified owner) –

    Love it. Well made and super clean

  77. David Mueller (verified owner) –

    Great product

  78. Anonymous (verified owner) –

    Very happy with my purchase

  79. Nicholas (verified owner) –

    Good product just got it have not had time to test it. The rail mounted easily and looks sturdy, only time will tell

  80. Danny W. (verified owner) –

    It fit like it should have. No problems at all.

    Image #1 from Danny W.
    Image #2 from Danny W.
    Image #3 from Danny W.

  81. Clint (verified owner) –

    Quality is good, coating was complete with no flaws.

  82. Ignacio Landeros (verified owner) –

    Just what the b14 needed

  83. Jason Lady (verified owner) –

    This rail is amazing. It has a great fit on my CZ AT-1 and works as advertised. The QD works perfectly. The installation was a bit tricky because of my stock but I was able to get it all together and it’s working perfectly.

    Image #1 from Jason Lady
    Image #2 from Jason Lady

  84. Joshua (verified owner) –

    Great product by a great company.perfect fit and finish. Couldn’t ask for better.

  85. Anthony S. (verified owner) –

    Great rail fit great on the Bergara HMR Wilderness. Very sturdy!

  86. Tommy Dube (verified owner) –

    Easy install great product

    Image #1 from Tommy Dube

  87. Zachary (verified owner) –

    Works great on my Bergara B-14 HMR

  88. Jeremy Baker (verified owner) –

    Great product. Fits as it should. Solid!!

  89. Anonymous (verified owner) –

    Well made and a very high quality part

  90. Anonymous (verified owner) –

    Well built

  91. Randon (verified owner) –

    Perfect fit of the lower rail replacing my Bergara lugs. I’m glad they recommended Area 419. I see several products I need, like a muzzle brake.

  92. Travis Richards (verified owner) –

    419 bi-pod rails area awesome. High quality and their attention to detail is awesome.

  93. Scott H. (verified owner) –

    Works great 👍

  94. Ash (verified owner) –

    Fitted on the w/end, I can now attach my atlas bipod and o-light comfortably on the rail regardless of where the screws are as you guys had the brain power to recess them in a little further than your opposition. Utilising the QD flush cup for my sling too. Looks pretty tacti-cool love it 🤙

  95. Nerjus (verified owner) –

    👍

  96. James (verified owner) –

    The Badger Ordnance did not fit my Manners stock, this one fit. I will say the machining is much nicer so makes for for a much nicer finish. Definitely a first class product.

  97. Chandler (verified owner) –

    Great product and doesn’t exactly what I needed it to.

  98. Nicholas (verified owner) –

    Looks well made. Returned prior to installation as it was not what I needed.

  99. Ryan (verified owner) –

    Works great

  100. Anonymous (verified owner) –

    Quality of the rail was next level…highly recommended!

  101. Mike Tate (verified owner) –

    Was a perfect fit looks great works great

  102. Elliot Thompson (verified owner) –

    The rail was awesome

  103. Scotty Ledgerwood (verified owner) –

    Well made, high quality product.

    Image #1 from Scotty Ledgerwood
    Image #2 from Scotty Ledgerwood

  104. Steve King (verified owner) –

    the t nuts needed a bit of adjustment

  105. Daniel Schachter (verified owner) –

    High quality! Fast shipping! Perfect fit for my bergara hmr…mounted my atlas and it was a match made in heaven. Super easy install remove the sling swivels and toss on the rail with the provided hardware then off to the range you go.

  106. Bobby M. (verified owner) –

    Rail does its job with tier 1 quality and attached to my Bergara hmr 6.5 crd. rifle with ease, did not even need the included hardware.

  107. Anonymous (verified owner) –

    Exactly what was advertised. Works great.

  108. Charles B. (verified owner) –

    Great quality

  109. Matthew E. (verified owner) –

    Easy install, mounts solidly to the forend, doesn’t interfere with barrel float. Smart design.

  110. James H. (verified owner) –

    Love this rail! Install was a breeze on my Bergara HMR PRO. This rail seems well thought out and more than sturdy enough for .300 PRC.

  111. Anonymous (verified owner) –

    Fits perfectly on my Bergara B14-R, and so far performs well.

  112. Cesar (verified owner) –

    Works really well for my Bergara B14 HMR

  113. Tony (verified owner) –

    Nicely machined and a perfect fit on my 2022 CZ457 Varmit with Manners stock.

  114. James Brown (verified owner) –

    Works great with my Atlas bipod, attached to my B14HMR the screws replace the sling studs perfect fit, easy to install!!

  115. RANDY CROWE (verified owner) –

    I bought this rail for my new Bergara HMR and it installed easy. It provided rock solid mount for my bipod.

  116. Sam Prater (verified owner) –

    Works perfect on my Manners T2A

  117. Anonymous (verified owner) –

    Price is awesome.

  118. justin j. (verified owner) –

    Fit perfect and whoever programmed the tool paths took time, it’s like jewelry!!

  119. Sean G. (verified owner) –

    My second one and not my last

  120. joe renna (verified owner) –

    alittle pricey

  121. William (verified owner) –

    The rail is very high quality and well machined.

    My existing mounting holes were spaced at 1.5″ center to center which I used but as the instructions point out, this would make using the QD sling cup dangerous and would be too much stress on the rail. So I added a third mounting hole all the way at the back for three total and a rock solid mount.

    Area 419 was very helpful in providing extra hardware for me to add this third bolt.

    Thanks again!

  122. Anonymous (verified owner) –

    Solid and snug. Looks great

  123. Robert C. (verified owner) –

    Great quality!

  124. Youssef A. (verified owner) –

    Fit and finish is awesome

  125. Tim (verified owner) –

    High quality rail. Fitment was great

  126. Brad B. (verified owner) –

    Love it

  127. Ken Heger –

    Perfect fit and function on my Bergara B14R! I’m using an Atlas bipod and the fit is excellent!

  128. Joseph B. (verified owner) –

    Great product. Fit and finish are perfect.

  129. Mitchell D. (verified owner) –

    Prefect fit for my B14-HMR

  130. Tyler Casper (verified owner) –

    Fits on my rifle just awesome. Great and functional product.

  131. Robin Moore (verified owner) –

    Fits my Bergara 6.5 PRC Wilderness perfectly.

  132. Mike Sherman (verified owner) –

    Great product gonna buy another one

  133. Charles O. (verified owner) –

    Good fit to my stock, very sturdy.

  134. Derrin (verified owner) –

    Good

  135. Clarence V Yarbrough (verified owner) –

    Grate product a perfect fit. Thank you

  136. Bryson (verified owner) –

    Blown away by how light it is, and yet still super robust. I already have plans to order another for one of my other rifles. Mounted up super easy to my Ruger Ranch in 300blk.

  137. Nicholas (verified owner) –

    Smooth edges and perfect fit on B-14R.

  138. Matthew Dickerson (verified owner) –

    Perfect fit and high quality

  139. Ryan (verified owner) –

    Ended up just barley fitting for my application. I think for a more universal application the entire mounting rail should be the same width that way you could put your screw anywhere. Price and product is outstanding just my input.

    Image #1 from Ryan

  140. Kelly H. (verified owner) –

    This rail was the perfect fit for my Bergara B14 HMR rifle

  141. Mikalan C. (verified owner) –

    419 quality is unmatched. If you have a wood/fiberglass stock that needs a rail for a bipod this kit has everything you need aside from the tools to install it!

  142. Anonymous (verified owner) –

    Awesome gear!!!

  143. Pedro C. (verified owner) –

    Perfect fit

  144. Anonymous (verified owner) –

    High quality product and I was able to adapt the hardware to easily fit my Tikka CTR’s original stock.

    Image #1 from Anonymous

  145. Derek Carpenter (verified owner) –

    I’ve done a lot of research, I have shopped around and read reviews. I’m not exaggerating when I say I’ve probably looked at every bipod rail available. The Area 419 is always my go to. This is my fourth rifle with one of these on it. I don’t even have to contemplate buying a different one anymore. They’re solid, extremely well machined, and low profile.

  146. F Dunsworth (verified owner) –

    High Quality

  147. Travis T. (verified owner) –

    Works great looks great

  148. Chris (verified owner) –

    Product quality is stupid good. Top quality. No sharp edges. Easily added to a T3X CTR.

    Image #1 from Chris
    Image #2 from Chris

  149. Richard Lindsey (verified owner) –

    Well made and fit was correct

  150. Relph F. (verified owner) –

    Again excited exception

  151. Anonymous (verified owner) –

    Great quality product and very fast shipping!

  152. Yan (verified owner) –

    Easy install and smooth wont cut your hand

  153. Zachary P. (verified owner) –

    This for perfect on the Bergara B-14R and it’s fit and finish is impressive. Highly recommend to anyone on the fence about it, it is worth getting.

    Image #1 from Zachary P.

  154. John P. (verified owner) –

    Works great

    Image #1 from John P.

  155. Andrew M. (verified owner) –

    Engineering of this product is EXCELLENT!

    Image #1 from Andrew M.

  156. Brent Marksberry (verified owner) –

    Installation was extremely easy, and it’s rock solid!

  157. Anonymous (verified owner) –

    Fit great

  158. Art (verified owner) –

    Excellent product

  159. Morvyn C. (verified owner) –

    Love it. Great fit, easy install, totally satisfied

  160. Kodi P. (verified owner) –

    Solid

  161. jason (verified owner) –

    Thought was just a little to high

  162. Anonymous (verified owner) –

    Nice product fit great

  163. Randi C. (verified owner) –

    The IBR was a little expensive but it is a quality part.

  164. John (verified owner) –

    I ordered this by mistake, I replaced it with the ARCALOCK 4.25″ Universal Dovetail Rail. Great piece of gear.

  165. King T. (verified owner) –

    Perfect solution for my bipod to mate to my HMR. Fit and finish is excellent.

  166. Bradley Gohlke (verified owner) –

    Perfect fit, proper hardware for mounting, exceptional precision

  167. William (verified owner) –

    Provides a lot of territory

  168. Kirklyn Valentine (verified owner) –

    No instructions.
    Easy enough to install of you have a decent amount of tools especially drill bits in my application. Cz 457 MTR

  169. Matthew (verified owner) –

    Sturdy and works great!

  170. Randy (verified owner) –

    I would recommend this product, it was easy to install and well made .

  171. RANDY SNEED (verified owner) –

    Machined to perfection.

  172. Martin (verified owner) –

    Pic rail that fits any spacing, worked great. As usual a super product frim Area 419.

  173. Anonymous (verified owner) –

    Bought it for a Boyd’s at-1 stock easily installed. Well engineered. Love it

  174. Anonymous (verified owner) –

    Awesome base! Fit is perfect on my rifle.

    Image #1 from Anonymous

  175. DANNY SPIVEY (verified owner) –

    Looks great and prefet fit

  176. Chad M –

    Great fit and feel on my Bergara Approach. Quick install with a factory look. Attached a Atlas PSR to it as smooth as butter. Only issue I had was that my flush cup on my sling would not snap in to the flush cup mount on the rail. On most reviews I would have dropped it to a 4 star because of this, but when I emailed customer service they were completely upfront that there were some issues with this that they believed were due to the anodizing being a little thicker on some rails that others. They put me in the system to have a replacement rail shipped asap. For that reason I gave 5 stars. My first time dealing with this company, but will not be my last.

  177. Chad M –

    Great fit and feel on my Bergara Approach. Quick install with a factory look. Attached a Atlas PSR to it as smooth as butter. Only issue I had was that my flush cup on my sling would not snap in to the flush cup mount on the rail. On most reviews I would have dropped it to a 4 star because of this, but when I emailed customer service they were completely upfront they there were some issues with this that they believed were to the anodizing being a little thicker on some rails that others. They put me in the system to have a replacement rail shipped asap. For that I gave 5 stars. My first time dealing with this company, but will not be my last.

  178. Bruce A. (verified owner) –

    Quality product, would purchase again and have no problem refering to friends.

  179. Jeffrey Long (verified owner) –

    Awesome

  180. Heath Jarvis (verified owner) –

    Great product!!!

  181. Leonard Sharp (verified owner) –

    Great rail and easy to install. Love your product’s.

  182. Mathew H. (verified owner) –

    Works great well thought out product

  183. Dean Lawter (verified owner) –

    Love this as an option

    Image #1 from Dean Lawter
    Image #2 from Dean Lawter

  184. Dennis Brierly (verified owner) –

    Great product.

  185. Anonymous (verified owner) –

    Great product fast shipping.

  186. Russell Chapman (verified owner) –

    Well made product. This will work well with my bipod system.

  187. Jaymeson (verified owner) –

    A+ don’t waist your time with others. Made to work and does just that!

  188. Willard Persinger (verified owner) –

    Love it Workes great on my cz

    Image #1 from Willard Persinger
    Image #2 from Willard Persinger

  189. Nick Wright (verified owner) –

    Solid construction. Easy install. Looks clean

    Image #1 from Nick Wright
    Image #2 from Nick Wright

  190. Durwin Bassett (verified owner) –

    Great quality. American made. Competitive price

  191. Chris H. (verified owner) –

    Great looking rail, machining is second to none. only reason I’m leaving 4 starts is the qd socket is way too tight. I’m having trouble getting my magpul qd to go in. I have to work it back and forth to get it to go in.

  192. JP (verified owner) –

    Fits perfect.

  193. Sean (verified owner) –

    Excellent product

    Image #1 from Sean

  194. Josiah S. (verified owner) –

    Fits on my rifle and very easy to install. Stable platform for my bipod, would highly recommend.

  195. Steve S. (verified owner) –

    This is my first Area419 purchase and I have to say they manufacture quality parts. The rail fits on my Bergara perfectly and functions just like it should.

    Image #1 from Steve S.

  196. frank mcnally (verified owner) –

    Haven’t used it yet. Might not do what I thought it would be for

  197. Kevin (verified owner) –

    Good quality rail. Came with hardware for stock install. Have not installed yet. Using swivel nut on stock for Harris bipod for now. Will install rail if I put bipod rotation adaptor on the bipod.

  198. Richard Schack (verified owner) –

    Perfect fit for my Bergara.

  199. Glenn R. (verified owner) –

    This is my second bipod pic rail, and it is of the finest quality. I keep coming back to Area 419 for that reason!

  200. Jason W (verified owner) –

    Ordered for an HMR pro to replace the sling studs and it was a perfect fit.

    Beyond being a perfect fit, the finish is crazy. Smooth doesn’t even begin to describe this thing! I love when people pay attention to details and provide a better product than expected, I was amazed to see how much attention was paid to such a small part. Very impressed and will absolutely be referring friends here. Part shipped out super quick and came with an awesome stick!

  201. Bob O (verified owner) –

    This is a perfect fit on my Bergara B-14 HMR. The included bolts are the perfect length, taking the place of the factory sling swivel studs.

    The design and craftsmanship of this rail is exceptional! Rifles should be equipped from the factory with items like this right from the start.

    And just like with my Hellfire order, this rail was shipped out same day and got to me in two days! Thank you!!

Add a review

Your email address will not be published. Required fields are marked *

Related products

+

BT56 1/4″-20 ARCALOCK Clamp Adapter

$20.00
+

ARCALOCK Clamp Black

$85.00
+
 This product has multiple variants. The options may be chosen on the product page

The RailChanger – From Area 419, Armageddon Gear and Reasor Precision

$185.00
+

ARCALOCK Spigot Extension

$30.00
+
 This product has multiple variants. The options may be chosen on the product page

ARCALOCK 6″ M-LOK Dovetail Rail

$70.00
Improved Bipod Picatinny Rail (IBR)
$40.00 Select options