Part of the Patented Hellfire Modular Brake System
There is no Universal Adapter included with this product!
NOTES ON CROSS COMPATIBILITY
SiCo Bravo/Omega fits (Ti and Steel)
– SilencerCo Omega 300
– SilencerCo Hybrid
– SilencerCo Hybrid 46
– SilencerCo Harvester BIG BORE
– Energetic Armament Vox
– Griffin Bushwhacker 46
– SilencerCentral Banish 46-V2
– Dead Air Nomad
– Dead Air Primal
– KG Made Rogue X
– Rex Silentium Fidelus / Viribus / Honoris
– JK Armament 155 Solvent Trap Kits
– RMS2 Hopaii/Shadow
– Yankee Hill Resonator R2
– Any suppressor with 1-3/8 x 24 rear cap threads
– Any “HUB” compatible suppressor
SiCo Charlie Mount fits
– SilencerCo Saker
– SilencerCo Chimera
– SilencerCo Omega 36M
Note: When installing this mount, the small silver/gold insert that’s inside your can from the factory must be removed. It simply pulls out, but may have some carbon binding it in place.
SiCo Alpha/Harvester fits
– SilencerCo Harvester 30
– SilencerCo Omega 9k
– SilencerCo Omega 45k
– SilencerCo Octane 9
– SilencerCo Octane 45
– Rugged Obsidian 9
– Rugged Obsidian 45
-Any suppressor with 1-1/8 x 28 rear cap threads
Dead Air KeyMicro fits
– Dead Air Wolfman
– Dead Air Ghost 45
Dead Air Sandman fits
– Dead Air Sandman K, S, and L
5/8-24 Direct Thread fits
– Any standard 5/8-24 direct thread suppressor like TBAC 30P1
– Use to convert any brake attach suppressor we do not make mounts for (this will add 1 inch of length, and is not ideal, but will work)
Thunder Beast BA
– TBAC 338 Ultra
– TBAC 338BA
– TBAC 30BA
Thunder Beast CB
– TBAC Ultra 5, 7, 9 in 6.5 or 30
– TBAC CB series
Suppressor Mounts
– Suppressor mount allows you to use your compatible suppressors with the Hellfire Self Timing Brake system by simply removing your Hellfire Brake and installing one of these mounts
– Made from aerospace grade 17-4PH Stainless Steel, Titanium mounts are made from US made 6AL4V
– Mounts are Black Nitrided to prevent galling. Titanium mounts are DLC coated.
– Made to meet manufacturers specifications, but these adapters are not associated with their respective manufacturers in any way.
– Generation 2 mounts no longer use a collar like the muzzle brake. These mounts get torqued into your suppressor and therefore allow your suppressor to become a direct thread onto the Hellfire Universal Adapter (left hand). (SiCo Omega, Saker, and Harvester started with the Gen 2 design)
- Allows the mount to be much more compact, and adds very little to the overall length of the system
- We recommend blue Loc-tite on the external threads of the mount to hold it semi-permanently in the suppressor. Since you will be threading the can on in a left hand direction now, if it is not torqued properly into the suppressor, you may unscrew it when attaching to the barrel. No fear though, its impossible to get the two stuck together in this situation due to the opposing thread directions, simply turn it the other way and they will separate, then start over.
- Gen 2 Mounts come with a HELLFIRE Wrench
NOTE: The use of Lemishine (or any citric-acid cleaner) or CLR to clean your brake will likely discolor the black nitride, and will void the lifetime warranty of your product. Don’t do this. Seriously. It’ll turn pink and you’ll feel like an idiot.
Universal Adapter
– Universal adapter system allows TOOL FREE use of multiple muzzle attachments
– Universal adapter is made in one operation on a state of the art CNC lathe, threads are 100% concentric to taper surface
– All Universal Adapters will come Black Nitrided to prevent galling.
– Available in 5/8-24 and 1/2-28. Both are class 3 fit.
This Video quickly shows how the Gen 2 suppressor mounts operate and how to install:
Here is an excellent video showing the repeatability you can expect from the Hellfire System. We switch between the brake, a TBAC Ultra 7 and SilencerCo Omega twice to show the POI consistency.
Here is a quick video covering installation and the ease of swapping between brake and suppressor
| Weight | .5 lbs |
|---|---|
| Dimensions | 6 × 3.5 × 2 in |
| Manufacturer | Area 419 |
| Suppressor Model | TBAC CB/Ultra, CRUX, SAS TOMB, HUB/SilencerCo Bravo/Omega SS, SilencerCo Alpha/Harvester, 5/8-24 Direct Thread, TBAC BA / 338 Ultra, SiCo Charlie/Saker, HUB/SilencerCo Bravo/Omega Titanium, Dead Air Sandman, Dead Air KeyMicro |
191 reviews for Hellfire Suppressor Mounts
Related products
Travis (verified owner) –
These adapters are outstanding, I loose no accuracy or repeatability when adding one to my TBCA or SilencerCo cans
Brian Vincent (verified owner) –
Nicely machined piece
James Heironimus (verified owner) –
Fit and finish are outstanding.
Anthony V. (verified owner) –
I ordered the Titanium HUB mount for my Silencerco Scythe Ti and they fit together perfectly. The fit and finish of the mount was excellent. The mount is exactly what I was looking for. Lightweight, fairly compact, and offered me a modular solution i can move from rifle to rifle. I’m rapidly becoming a huge fan of Area 419 products, this choice was no exception.
Norman R. (verified owner) –
Fit great!
Ross C. (verified owner) –
I use these on all my 30cal cans. Great mounts! Good stuff!
Michael N. (verified owner) –
Great product
Ray C. (verified owner) –
Fit and worked like it should .
Waad S. (verified owner) –
Perfect
John S. (verified owner) –
Worked great.
William Barron (verified owner) –
The quality and machine work on this item was phenomenal!
Travis C (verified owner) –
Absolutely love the Hellfire system and use these adaptors on all my TBAC cans! i would love to see 1 made for the OSS 762 Flow can!!
Anonymous (verified owner) –
Anonymous (verified owner) –
Exactly what I was looking for.
Marcio Do Nascimento (verified owner) –
Great!
Monte M. (verified owner) –
Wish my other suppressors supported this instead of direct thread!
Anonymous (verified owner) –
For a TBAC CB mount the weight difference is negligible with the suppressor as the A419 mount is slightly lighter than the CB muzzle brake.
Justin Perdue (verified owner) –
Perfect compliment to the muzzle brake. Easily switch from brake to suppressor with little to no poi shift.
Ryan (verified owner) –
Another high quality item by Area 419.
Kyl Kock (verified owner) –
2nd one awesome system
JOHN S. (verified owner) –
Excellent quality
kyle (verified owner) –
Exactly what I needed to swap cans across guns without adding length.
Jeffery (verified owner) –
Very satisfed. Canging from brake to suppressor is quick and easy.
David DeGeorge (verified owner) –
Works great muzzle device off silencer on easy peezie
Sean R. (verified owner) –
Mount works perfectly. Switching from brake to can is simple now.
Justin Stabler (verified owner) –
These work great and are very easy to use.
arther bailey (verified owner) –
perfect
James P. (verified owner) –
Have only used it once, but quality appears very good and performs well, as expected. Have always been more than satisfied with all Area 419 purchases.
Bobby D. (verified owner) –
Works as advertised return to zero is great and so is looking for and finish
WILLIAM H. (verified owner) –
Great product
Ray Roe (verified owner) –
Works as it should.
Michael S Miller (verified owner) –
Nice for can removal back to point of impact after transporting.
Warren A. (verified owner) –
I love the fact , I can go between my brake and suppressor easily
Anonymous (verified owner) –
Love the left hand threads.
Christopher (verified owner) –
If you hate magic and love it when Uncle Sam has his way with you, then go kick rocks this product is not for you. But, if you like great engineering, can speak bald eagle fluently and own a proper muffler, then this product IS for you.
David P. (verified owner) –
So far the Bravo (HUB) mount has been great for swapping between a Hellfire brake and a can. Return to zero has been consistent and haven’t experienced any carbon locking. Love the Hellfire brake for matches and it’s awesome being able to leave the adaptor on the barrel to swap and not wear the muzzle threads.
Albert Graf (verified owner) –
Always top notch products. It’s nice to know that I can have confidence in Area 419 products. Built to last!! This is my second suppressor adaptor, only because I bought another Omega 300.
Michael O’Connor (verified owner) –
Still awaiting suppressor but adapters appear to be high quality!
Craig Myers (verified owner) –
Excellent product, currently have 5 across my rifles for modularity between scilencer and hell fire brakes
Timothy Smith (verified owner) –
Works good ! Would buy again!
Thomas B. (verified owner) –
Nice product
Andrew Dore (verified owner) –
Part fit great and will allow me to take my suppressor on and off as I need.
Andrew D. (verified owner) –
Great product
Anonymous (verified owner) –
Have multiple, works as advertised
Danilo (verified owner) –
Excellent product as I’ve recently switched to this mount. Very convenient for changing brakes to suppressor and vice versa.
Brian –
Very easy install. Great lock up on multiple rifles.
Jason (verified owner) –
Great product!!
Jeffrey (verified owner) –
I especially like how lite weight this thing is. Much lighter than what came with the suppressor.
Joe B. (verified owner) –
Easy process to attach to suppressor. The whole system couldn’t be easier.
John Geoppinger (verified owner) –
I have Hellfire brakes on all of my modern bolt action rifles. When I bought a SiCo Hybrid 46m suppressor, this was a must have for me. I check alignment every time I put a can on a rifle, and with this adapter, I get perfect alignment every time. Being able to remove my brake and add a can without tools is awesome. If you have Hellfire brakes and suppressors, this is a no-brainer of a purchase. Works perfectly and, as always with Area 419 products, machine quality is impeccable.
Jonathan O. (verified owner) –
Looking forward to using this when the other piece comes in.
Charles Anderson (verified owner) –
Makes shooting suppessed easy
Christopher F. (verified owner) –
For the price it’s awesome. I could have bought titanium, but 1oz is not that much of a difference on a stupid light can.
Anonymous (verified owner) –
Premium machining that is reliable and functional. All instructions are provided. Works great for my use case
david m. (verified owner) –
Works perfect
Matt S. (verified owner) –
Haven’t gotten a chance to try it out yet. Fit and finish look great, smaller than my original suppressor adapter. solid packaging, has space for tools and extra adapter.
Brandon N. (verified owner) –
Thanks. Perfect.
Axel Torre (verified owner) –
This allows the switching the can to another rifles with ease and painless tools
Mark (verified owner) –
Fits perfectly
Eric Brown (verified owner) –
This fits Banshee 30 Gold
William S. (verified owner) –
Providing complete information to make the correct decision makes life simple.
Joseph D. (verified owner) –
Fit perfectly on my Nomad 30LT.
Ryan Bailey (verified owner) –
Great experience.
Brian Z. (verified owner) –
Very well made and fits perfectly with precision. I haven’t had the opportunity to use it yet. Soon!
Verified Buyer (verified owner) –
Great for making all of your gun the same thread. Love the product!!!
Benji Alderman (verified owner) –
This is a very convenient and effective way to switch between your hellfire break and your suppressor.
Verified Buyer (verified owner) –
Perfect interface to mount my Silencerco suppressor to my Daniel Defense Delta 5 Pro. Solid mount and quick to charge between muzzle brake and suppressor.
Rob G. (verified owner) –
Perfect but a bit pricey!
Matthew H. (verified owner) –
Very nice fit, smooth
Anonymous (verified owner) –
Exactly what I needed. Quality packaging and product!
Ed P. (verified owner) –
I love the Hellfire system. This is the third can I have equipped with a Hellfire Suppressor Mount and they work flawlessly. I love how easily cans and breaks can be swapped using this mounting system.
DAVID M. (verified owner) –
top notch merchandise!
Matthew Loy (verified owner) –
Awesome products
Richard L. (verified owner) –
Works great on my TB Ultra 7.
Jesse E. (verified owner) –
Works perfectly for the Omega 46M.
Robert D. (verified owner) –
If you like hellfire brakes and own a SiCo suppressor, this adapter is a no-brainer. Works perfectly, never loosened during shooting did not change POI compared to a direct 5/8×24 direct thread attachment. Perfect.
Anonymous (verified owner) –
I haven’t gotten to use it yet but the design is great with the hellfire muzzle ecosystem
Matt (verified owner) –
You pay for quality
Anonymous (verified owner) –
Good set up. I had to order an adapter from Quiet Bore to go from 24TPI to 28TPI. Would be nice to see a mount in 24TPI as it would save an inch in added length. I expect there are a ton of QB cans out here in the wild.
Toby Fidler (verified owner) –
Was just what I was looking for.
Scott (verified owner) –
A little pricey, and I had to wait several weeks as it was out of stock when I bought 2 Hellfire Match 30 cal Muzzle Brakes. I will say alignment is spot on!
Blake R. (verified owner) –
.
Jadon Wilkerson (verified owner) –
👍
Luis Acosta (verified owner) –
Works perfect.
Dominic D. (verified owner) –
Worked very well
Daniel G. (verified owner) –
Just what I needed
Robert P. (verified owner) –
Adapter looks solid will run it a bit to make sure it is as solid as it looks
Rigoberto Rivera (verified owner) –
Quality product
Mike A. (verified owner) –
Find like a custom glove on my Silencer Central Banish Gold suppressor.
MARK ITZSTEIN (verified owner) –
Perfect fit and finish
John G. (verified owner) –
These are a fantastic idea. I love being able to swap my Hellfire brakes to a suppressor quickly and easily. Quality is always top notch!
Michael Lee (verified owner) –
Price is right and below other companies for similar products, and I wouldn’t buy or take my business to anyone else!
Bruno M. (verified owner) –
Easy install. Comes with a tool to torque it down which is a huge plus
Dustin S. (verified owner) –
A bit overpriced for what it is. Works great though.
Mark N. (verified owner) –
Crux suppressors and components are no longer available and this adapter fits perfectly.
Donald (verified owner) –
Nice workmanship
Anonymous (verified owner) –
Looks great and matches perfect with other parts.
Anonymous (verified owner) –
Initial reaction is that it’s finish quality is outstanding and at the same level that my brakes and arca accessories have… now I wait for the can to arrive.
Jeremy Walker (verified owner) –
Was a big fan of the ASR mount but this paired with my hellfire, a perfect combo
Nathan Noble (verified owner) –
The Ti Bravo mount is light AF and the machining is impeccable. Need to make a Ti Hellfire taper mount too.
Paul (verified owner) –
Fit like a glove when I installed it on my SilencerCo Omega 36m
David B. (verified owner) –
perfect fit and finish. Worked exactly as advertised. Love the ease of this system to swap my can from weapon system to weapons system…cheap and easy!
Paul Thompson (verified owner) –
Suppressor adaptor for Hellfire brake.
Ralfi H. (verified owner) –
Quality mounts. Well made and a perfect fit for the suppressor I have.
Brad (verified owner) –
Compact brake for TBAC is rock solid. Good quality. Just works.
Robert D. (verified owner) –
This is my second mount. Consistent quality. Extremely pleased.
Robert D. (verified owner) –
Quality product that is extremely functional.
Michael M. (verified owner) –
Kind of pricey, but good quality.
Chris williamson (verified owner) –
Awesome piece of equipment
Daniel (verified owner) –
Excellent machining will definitely buy again
Jeffrey H. (verified owner) –
If you are gonna run a can you need this. I love it.
STEVE HUTCHINGS (verified owner) –
Works great. thx
Vincent b. (verified owner) –
Can’t go wrong with this. It’s well made the fit is great
william sullivan (verified owner) –
adapter fit perfectly
Basil (verified owner) –
Perfect & practical system!
Dan Blake (verified owner) –
Absolutely love the hellfire series of adapters and brakes. Hands down the best way to mount brakes and suppressors on your rifles.
Matthew L. (verified owner) –
Awesome customer service and awesome products
BLAKE V. (verified owner) –
Make changing from brakes to suppressor super quick and easy. Honestly just about as fast as any QD system i’ve used.
Robert (verified owner) –
Works perfect with my harvester evo. Perfect alignment and easy to install.
Andrew (verified owner) –
Great mounting system and allows to quickly swap between suppressed and unsupressed with muzzle devices for the appropriate application.
Thomas Luttrell (verified owner) –
Great craftsman ship went into this produce. Have not used yet still waiting on ATF to aprove my Form 4.
Scott M. (verified owner) –
Makes mounting your device a snap, handy for using one can on various weapons.
David Larson (verified owner) –
Great product
Daniel Lopez (verified owner) –
Perfect
Steven H. (verified owner) –
Great little mount, easy to go on and off the muzzle devices
David Bergman (verified owner) –
Love it easy to install
Ross C. (verified owner) –
Works on my TBAC Ultra7 as it should
roman s. (verified owner) –
Well priced
Eric H. (verified owner) –
Awesome mount. Can switch between brake and suppressor in seconds
Ben C. (verified owner) –
I have this torqued into my suppressor so I can easily mount this or my Hellfire Match brake. Works perfectly!
Paul H. (verified owner) –
Put this in my Thunder Beast Ultra 9 and installed universal adapters on all my rifles. Now swapping the can from one rifle to another takes only seconds.
Jay Klaverweiden (verified owner) –
Works perfect
Sean G. (verified owner) –
Love these mounts
Anonymous (verified owner) –
AREA 419 is simply a by the numbers group. As always the quality is fantastic.
Jay Klaverweiden (verified owner) –
Works prefect.
Duane Straus (verified owner) –
Awesome that now I can easily switch cans on different guns
Kyle (verified owner) –
Fit perfect.
Travis terrell (verified owner) –
I’ve never received an area 419 product that was less then amazing keep up the good work
Shawn S. (verified owner) –
Went on easy and it comes with the wrench which is a big plus !
Trey Supan (verified owner) –
Good product!
Shane (verified owner) –
Perfect for converting my SiCo cans over to the hellfire mounting system.
Daniel (verified owner) –
great product, very nice finish and quality
Durwin Bassett (verified owner) –
Makes swapping one can to multiple rifles super easy
Craig K. (verified owner) –
Great product, would recommend.
William (verified owner) –
Perfect fit for my suppressors. So much so, I’m converting two of my 51-tooth mount suppressors to Area 419 Hellfire Mounts.
Chad T. (verified owner) –
Awesome accessory
Joseph Lewis (verified owner) –
will be a nice addition to be able to swap my suppressor between rifles like I do my Hellfire brake.
Anonymous (verified owner) –
Nice to be able to switch from break to can with no tools
Anthony Viera (verified owner) –
Outstanding quality like always
brian (verified owner) –
top notch stuff from 419
Sovida T. (verified owner) –
Perfectly completes the Hellfire system
Anonymous (verified owner) –
Very nicely made
Ben B. (verified owner) –
Using with a Rex silentium MGX. The O ring is a very nice feature
Daniel B. (verified owner) –
The hellfire mounts are excellent
John Swailes (verified owner) –
Very good quality arrived with all the tools if I need a new barrel I will order from this company
Hunter Gough (verified owner) –
Knocked it out of the park, the ability to swap between a great break and ones suppressor is critical when hunting, shooting matches or just trying to keep the piece with the neighbors during training at home. This mount allows us to do just that. Thanks as always for a great, no nonsense product.
sean (verified owner) –
Creates a light & modular transition from brake to suppressor on as many rifles as you want.
Chris P. (verified owner) –
Great suppressor mount solid solution.
Stephen M. (verified owner) –
This website transaction and delivery was excellent as has been all transactions I have had with Area 419. The Hellfire, uni adapter, and suppressor mount are just works of machining art…again, like all 419 products I have bought.
I def will do business with them again and I’m very pleased with this brake/adapter purchase.
Paul T. (verified owner) –
Extremely well machined
Christopher G. (verified owner) –
Easy to install and makes switching between rifles a snap.
Evan (verified owner) –
The cost efficiency and reverse thread pattern put it on a different level than most comparable mounting systems. Taper mount is simple, rugged, and accurate 🤙
Robert (verified owner) –
Exactly what it said it was
Greg (verified owner) –
Love the reverse thread and taper mount for my suppressor. Easy install and like the low price, weight and length. Great setup for precision guns and light duty AR use.
Garrett Sharp (verified owner) –
Great product, loved it so much I purchased 4 more to convert more of my rifles to this style mount. Set my Saker 7.62 on this system as well.
Keith K. (verified owner) –
I was searching for a way to unify mounting for my CRUX, SilencerCo, and DeadAir suppressors. This solution is great. It was easy to mount and fit flawlessly with all my suppressors.
dustin (verified owner) –
Bought several! Great quality!
Matthew Rainville (verified owner) –
Great products!
Jon Stacy (verified owner) –
You guys are the best. Thanks for the primers at big dog steel match.
Corey Shrewsbury (verified owner) –
Worked perfect great product
Ryan K. (verified owner) –
Great product. I will buy again
Jason (verified owner) –
I wish I knew about all their muzzle devices before I bought a suppressor.
Tony K. (verified owner) –
Needed this to fit my form 1 suppressor to the universal adapter that usually holds my brake. Works perfect, as always great machine work from 419
Jon Cole (verified owner) –
Awesome
Erin McManus (verified owner) –
Very nice option for the Silencerco Omega!
Morvyn C. (verified owner) –
Makes swapping brake and suppressor a breeze.
Blaine Z. (verified owner) –
Well made. Works great.
Kyle M. (verified owner) –
Waiting for my can to come
In, but have used this mount with a CRUX and I like it.
Mark Q. (verified owner) –
Excellent fit and finish. Easy installation.
Brian L. (verified owner) –
Next level taper mount!
Michael (verified owner) –
They have a wrench included with the product. It makes it easy to install and remove.
Rigoberto Rivera (verified owner) –
Great product
Jason (verified owner) –
Super simple and easy to use.
Anonymous (verified owner) –
Just need to find powder for reloading.
Marshall M. (verified owner) –
Does what it’s supposed to. No complaints here.
Weston G. (verified owner) –
Quality is excellent.
Frank (verified owner) –
Mounted up very easily to my Harvester 30. Excited to use when correct universal adapter arrives
Walter (verified owner) –
Best suppressor mount I have tried. Converting everything to the Hellfire system.
Zev (verified owner) –
Seems great so far, appears repeatable.
Jorge Bonilla (verified owner) –
This mount is pretty awesome and a no brainer, especially if you use the Hellfire system already. The suppressor mount allows me to quickly remove the suppressor and install it on any of my rifles quickly.
Treyh007 –
What a simple yet efficient Suppressor Mounting System. It’s Extremely well made, super light weight and has held up well through several hundred rounds along with switching from break to suppressor. Threads are smooth and tapers are tight, very impressed on machining and craftsmanship. Using this on a Grendel, Creedmore, and 300BO on a Silco Harvester 30. They all hold zero when switching back and fourth. Will be ordering another HF 2P break and Supp mount when my Omega gets approved. You will not find a better suppressor mounting system for the money! I highly recommend Area 419 gear.