Bullet Seating Plate for The ZERO
$30.00
With modern sleeve/micrometer seating dies, all alignment and interaction should be between the shoulder/taper of the case and the die, so we have designed and are now shipping a seating plate for the ZERO, meant to offer a perfectly flat surface to push your cases, with no possible die interference.
This seating plate is precision ground stainless steel, guaranteed to be flat, and has more contact surface than any traditional shellholder could have. It also has no extraction rim, so there is no way for it to be making contact with the seating sleeve that should be actuated by the case itself – which is an easy way to induce runout in the seating process.
NOTES: This works ONLY with the ZERO Reloading Press. If you order it for a different press, you’ll be very disappointed. This also, by design, has no extraction rim. This may result in cases needing to be removed by hand from seating dies when the bullet is seated. Some we have tested will freely release from the seating die with gravity, others need to be removed by hand.
| Weight | .2 lbs |
|---|---|
| Dimensions | 4 × 3 × 1 in |
86 reviews for Bullet Seating Plate for The ZERO
Related products
Christian B. (verified owner) –
For bullet pointing, primer seating this does have a nice fit in the press.
Delbert (verified owner) –
What can I say, it worked perfect but I do not need it anymore. With the Zero press I can use my on the press seaters and its the same every time. I had more slop in my other press, more than I knew.
Tim O. (verified owner) –
With zero press makes for uniform reloads
Daniel Devling (verified owner) –
Not used yet. Appears fine.
Drew D. (verified owner) –
Beautiful. Tolerances so tight it makes a bank vault seem like an open door.
Ethan Heiney (verified owner) –
Very nice Idea for seating. Speeds up the process
Gabriel Ruiz (verified owner) –
Good fit, nice accessory!
Lee C. (verified owner) –
Well made, and a simple solution to accurately aligning the bullet and case
William Teel, Ph.D. (verified owner) –
Excellent way to seat bullets.
Rueben Weickum (verified owner) –
Hav’nt used it yet
GINO SALADINO (verified owner) –
WORKS GOOD
Christopher Durham (verified owner) –
Works great but $30 I don’t want to sound cheap. But I baught it
Kenneth (verified owner) –
Great product
Joe Ben O’Quinn (verified owner) –
Nice!
Nieshia C. (verified owner) –
Works well.
John Morgan-Hosey (verified owner) –
Super Quality Manufacturing.
James Tulip (verified owner) –
Perfectly flat surface.
Barry (verified owner) –
As always fit for purpose.
Oliver (verified owner) –
Haven’t used it yet but top quality
Ron Sanders (verified owner) –
Good
Edward (verified owner) –
I have not used it, yet. It is nicely machined.
Spencer L. (verified owner) –
Simple precision repeatability
Michael Langlois (verified owner) –
Get this or you will have to order it separately.
Tyson (verified owner) –
Fit & finish is top notch.
Adam (verified owner) –
Works great
Sandy S. (verified owner) –
Haven’t used yet but I’m impressed by how it works. Picture shows a cover or something on the surface but it is stainless steel and smooth. Perfect!
Tevis Smith (verified owner) –
Easy to use
Teofil Gieryn (verified owner) –
Perfect!!!!!!!!
Anonymous (verified owner) –
Fits nicely haven’t gotten around to using yet .
ionut D. (verified owner) –
Usefull accessory for the Zero press.
Jan Cremers (verified owner) –
ZERO tolerance!
Mark (verified owner) –
Nice way to seat bullets.
Brian Clarke (verified owner) –
Have not used it yet but very happy that it was available
JOEL JAIMES (verified owner) –
Great
Michael P. (verified owner) –
Works as intended, nice and easy to use
John Mallett (verified owner) –
Perfect
Ronald Blatt (verified owner) –
Excellent product
Larry Hamblin (verified owner) –
It’s hard to center my caseing on. If not centered it still seats the bullet a little off.. I found it more accurate to just use my shell holder
Don Dory (verified owner) –
A simple thing that takes any ambiguity out of seating a bullet.
Anonymous (verified owner) –
.
Corey (verified owner) –
Have not used yet but we’ll built!
Muhammed S. (verified owner) –
Recommended
Gus (verified owner) –
So simple, but so effective.
Timothy Swaney (verified owner) –
Easy setup
Tim K. (verified owner) –
Great
Jeremiah Thompson (verified owner) –
Great products, incredible quality but pricey.
Bradley (verified owner) –
Precision
mitch lee (verified owner) –
This was a great idea and feature
Bradley (verified owner) –
Good idea.
Anders Evason (verified owner) –
Havent tried yet
Jeremy Smith (verified owner) –
Haven’t used this yet, but the idea is sound.
Robert M. (verified owner) –
Haven’t used it yet
Jack (verified owner) –
Unique concept allowing self centering.
Shelby (verified owner) –
Works. Great
Shawn P. (verified owner) –
Perfect
Charlie (verified owner) –
Well-packaged, fast turnaround on order, and more importantly….second to none products!
Robert F. (verified owner) –
Excellent
Donald DeBord (verified owner) –
Best ever great products and fast shipping!
William Bell (verified owner) –
Quality on par with the press
mark R. (verified owner) –
Great product
Robin Retzloff (verified owner) –
Flat, round, and it fits.
Jonathan (verified owner) –
Amazing products
joseph c. (verified owner) –
I was impressed on how easy it was to seat with this item being use. Area419 makes superior products
Brian S. (verified owner) –
Great addition for seating on the Zero Press
Kyl K. (verified owner) –
Perfect as always from 419
Christopher J. (verified owner) –
Great product.
James Nier (verified owner) –
great products and great service4
Vincent (verified owner) –
Nice, solid, flat surface. Perfect.
Jordi Calvet Torrents (verified owner) –
Valid!
steve g. (verified owner) –
Excellent
Tim (verified owner) –
Love the idea of it. So far hasn’t worked well with my seating dies. Have to remove each round by hand.
Kenneth Longo (verified owner) –
Fantastic all around.
Christopher Tuter (verified owner) –
Great product.
Robert D. (verified owner) –
Great product
Jim Laverty (verified owner) –
Good product. Works as descrubed
Robert W. (verified owner) –
Simple, but it does its job.
Zachary Hritz (verified owner) –
Must have accessory!
ERIC ALLREAD (verified owner) –
Works great
Kurt Lohrmann (verified owner) –
Great Product
George W. (verified owner) –
Just waiting for the machine
Justin (verified owner) –
A great accessory to add to your reloading station.
Eddie C. (verified owner) –
not used it
Richard Drake (verified owner) –
Well made
Jeffrey Carlson (verified owner) –
Top quality product like all Area 419 products.
Michael M. (verified owner) –
Works great !
Arron Hamilton (verified owner) –
I liked the idea of this as soon as I saw this listed! Another win for Area 419! A solid square base on top of the ram in place of a shell holder! For seating! I love it!