Auto Trickler Self-Centering Tray for A&D FX Scales

$75.00

Description

This was one of our most requested upgrades for the Autotrickler setup, and we aren’t ones to ignore what our customers want!Ā  So we give you the billet aluminum replacement platen for the A&D FX series scales for the Autotrickler setup.

Compatible up to V3. NOT compatible with V4 Auto-Trickler unit.

Features-

– Funnels our Billet Powder Cup perfectly to center where it drops in a small notch to hold in place
– Center of gravity is re-aligned to concentric with the load cell taking into account the weight of our powder cup handle
– Installs into the scale exactly the same as the factory platen using the tapered spud and square locating boss
– A must have when using our Autothrow housing and billet straw
– Machined from a solid 2.3 pound billet of 6061-T6 Aluminum
– Weighs 0.208 pounds (similar or less than the factory trays)

-V3/V2 compatible only.

Weight .3 lbs
Dimensions 6 × 4 × 1 in
Manufacturer

Area 419

72 reviews for Auto Trickler Self-Centering Tray for A&D FX Scales

  1. Bryan B. (verified owner) –

    Great add for the A&D FX

  2. Daniel C. (verified owner) –

    bad fit wiggles from side to side

  3. Aaron R. (verified owner) –

    Iā€™m not sure why I waited so long to get this. Game changer for sure.

    Image #1 from Aaron R.

  4. Daniel McCullough (verified owner) –

    A must-have for fx scale owners. The powder cup fits perfectly and should be purchased together with this tray.

  5. Verified Buyer (verified owner) –

    šŸ‘šŸ‘šŸ‘

  6. Jake Foltz (verified owner) –

    Good quality

  7. Alejandro Rodriguez Wilkes (verified owner) –

    Beautiful work as usual

  8. Anonymous (verified owner) –

    It does exactly what it supposed to do. The autotrickler upgrades are absolute must have. If I had known how much better loading is with these products, I never wouldā€™ve waited to buy.

  9. Peter Russell (verified owner) –

    Great addition to my scales and alloy cup

  10. Mark S. (verified owner) –

    Better than expected !

  11. Troy (verified owner) –

    Very nice quality

  12. Mike (verified owner) –

    Works very well

  13. Brant Lindsey (verified owner) –

    Works great

  14. William Arbogast (verified owner) –

    worked great

  15. Brant L. (verified owner) –

    Works great

  16. Richard Drake (verified owner) –

    good design

  17. Thomas M. (verified owner) –

    This is a great upgrade to go with the AutoTrickler system.

  18. Dallas Alexander (verified owner) –

    Their products are always top notch. They are pricey but they are of the highest quality. You buy once cry once.

  19. Greg Estes (verified owner) –

    Fits the scale perfect with no wobble

  20. John Frogge (verified owner) –

    I previously bought an Area 419 powder cup for use on my A&D FX scale and this tray efficiently assures that it is perfectly centered each time. Thank you, Area 419!

  21. Lawrence L. (verified owner) –

    Always centered, positive recessed stop.

  22. Grant (verified owner) –

    Great product

  23. Ariel (verified owner) –

    Flawless form, and function thank you.

  24. Chris (verified owner) –

    Area 419 makes some super nice stuff. Expensive but worth it if you take your reloading serious and have pride in American made products!

  25. Samson Hurt (verified owner) –

    Tray itself is good quality. Needs to be re designed to cover full platen or come with platen cover so kernels and debris dont accumulate there. Other than that it’s a great idea for easy self centering.

  26. JOSEPH C. (verified owner) –

    I like the look and the craftsmanship of this piece and it does serve a good purpose for placing the 419 powder cups however it hasn’t proved to be worth the upgrade (to me) as of yet. The scale drifts and the powder charge can be inconsistent with it during trickle up. Went back to the original scale base for now, maybe I’ll give it a shot again some day.

  27. Beshenov Sergey (verified owner) –

    I am very satisfied!

    Image #1 from Beshenov Sergey

  28. John S. (verified owner) –

    The billet aluminum platen is wonderful with its self-aligning notch and detent for the matching billet powder cup. Highly recommended accessories for the A&D FX Series scales.

  29. Antonio Gonzalez (verified owner) –

    Outstanding piece of work. It fits perfectly on A&D 120i, V3 AutoTrickler set up. I use it pointed to the right, towards the Trickler. This way I only have one breeze panel open, which helps with any possible drafts. Fits perfectly with the Area 419 cup. Just slides in, stops in the slotted area, the V3 does itā€™s thing. I would absolutely recommend this thing. Area 419 builds great quality products. Thatā€™s why I keep buying more, and more stuff from them.

  30. Lee (verified owner) –

    Looks as though the OEM made it for their scale. Perfect fit, form and function

  31. Randy B. (verified owner) –

    The recessed tray makes it easy to place the powder cup in the correct position

  32. Ron V. (verified owner) –

    This self-centering tray eliminates any variation in positioning of the powder cup. Installation is simple and performs exceptional.

  33. Robert R. (verified owner) –

    Perfect fit for my Auto trickler V3. Great product and top quality by Area 419 as usual.

  34. DAVID K. (verified owner) –

    Work well with my scale, it helps produce consistent trickled weights

  35. Phillip Dyson (verified owner) –

    Ensures repeatable accuracy by getting the powder tray in the same spot quickly for accuracy

  36. Anonymous (verified owner) –

    Same as above

  37. Robert G. (verified owner) –

    Fit and finish A+

  38. Matt (verified owner) –

    Nice upgrade, works perfectly with the powder cup

  39. Been C. (verified owner) –

    A+++++. Thank you

  40. Mark H. (verified owner) –

    Fantastic product

  41. James B. (verified owner) –

    Fits perfectly – centers the powder cup on the scale platen

  42. Mike Q. (verified owner) –

    A++

  43. michael e. (verified owner) –

    Extremely well made and fits perfectly

  44. Michael Brock (verified owner) –

    Really good to line up and trickle

  45. Roy Smit (verified owner) –

    permanent place for the cupholder

  46. Patrick M. (verified owner) –

    Perfection. That’s really all there is to say.

  47. Zachary Hritz (verified owner) –

    Perfect fit!

  48. Ryan T. (verified owner) –

    Quality Product!

  49. Matt Craddock (verified owner) –

    An absolute must have addition to the A&D FX scale. With this modification and the Area 419 powder cup being the only thing in my reloading process that has changed, my SD went from the teens to consistent single digits. Area 419 never disappoints!

  50. William Jones (verified owner) –

    High Quality

  51. Michael S. (verified owner) –

    Definitely easier to use

  52. Thomas F. (verified owner) –

    The perfect mate to the billet cup.

  53. Robert G. (verified owner) –

    Looks great, fits perfectly.

  54. Darren I. (verified owner) –

    Made lining up cup perfect

  55. James C. (verified owner) –

    No idea because it still isnā€™t here.

  56. Royston Wheller (verified owner) –

    What a great piece of kit no more to be said

  57. Robert Summerfield (verified owner) –

    Looks pretty nice. I can’t use right now because the cup it works with is not in stock and hasn’t been for some time.

  58. Jim Laverty (verified owner) –

    Very well designed

  59. Thaine (verified owner) –

    Perfect alignment every time

  60. Chance L. (verified owner) –

    Buy this you wonā€™t be disappointed!

  61. James S. (verified owner) –

    Looks amazing and works perfectly… centres the pan dead on same place every time.

  62. James Stephens (verified owner) –

    The two layer tray that comes with the A&D is pretty low quality and has a quirk of, if you accidently hit the tray with the powder cup going in and you separate the two layers by just a little bit, you can throw your scale off by 0.02 to 0.04. It has always been a pain. The Self Centering Tray locks into place and simply doesn’t move. Great upgrade.

  63. Mark (verified owner) –

    Waiting for mine to arrive.

  64. RYAN MEYERHOFER (verified owner) –

    Everything appears to be made to perfect tolerances

  65. Garry Archer (verified owner) –

    its is great

  66. Kent Rawlins (verified owner) –

    Much easier to center the cup. Fit was perfect and it is pretty if that makes a difference

  67. Nicholas Brandler (verified owner) –

    Great add on

  68. Robert Y. (verified owner) –

    Great workmanship

  69. Anonymous (verified owner) –

    good stuff

  70. Anonymous (verified owner) –

    Like this improvement

  71. Jennifer (verified owner) –

    Awesome upgrade. No more guessing if youā€™re lined up good or not. Glad yall came up with this!

  72. Chad ventriglia (verified owner) –

    This was well worth the money, a def game changer in my opinion. I used to always have to bend to ensure I was lined up, had too many misplacments in the past.

    I love how itā€™s cut to fit the scooper perfectly. Would recommend to all

Add a review

Your email address will not be published. Required fields are marked *

Related products

+
 This product has multiple variants. The options may be chosen on the product page

Area 419 ZERO Headspace and Ogive Measurement Gauge Kit

$300.00 – $375.00
+
 This product has multiple variants. The options may be chosen on the product page

ZERO Sizing Die Mandrel Kits

$145.00
+

300 Place Loading Block

$300.00
+
 This product has multiple variants. The options may be chosen on the product page

ZERO M-Series Sizing Dies

$450.00 – $725.00
+
 This product has multiple variants. The options may be chosen on the product page

Universal 7/8″ Die Ring for Turret Presses

$25.00 – $195.00
Auto Trickler Self-Centering Tray for A&D FX Scales